Thermal Transfer Label Printer MERTECH TLP300 TERRA NOVA USB, RS232, Ethernet Black

The MERTECH TERRA NOVA TLP300 printer is designed for thermal printing of labels and receipts. It can print on paper, textile, synthetic ribbons, sticky labels, receipt thermal tape, and tags. This model features a modern mechanism, improved system board, practical design, and compact dimensions. It differs from the TLP100 model by having an increased ribbon length (300 m instead of 100 m).

Advantages of the Model

The NOVA TLP300 thermal printer from MERTECH has many advantages:

1. Print speed of 127 mm/sec. Resolution can be customized within the range of 203 DPI.
2. The system board supports the printing of one-dimensional and two-dimensional barcodes (PDF417 and QR code).
3. The Easy Load feature allows changing the ribbon or cash tape in 10 seconds.
4. Three interfaces are available for connecting to a POS system: USB, Ethernet, RS-232C.
5. Functionality: up to 10,000 receipts and labels per work shift.
6. Low noise level: up to 50 decibels (no louder than a voice).

Inside, there is an intelligent system board. The device supports two protocols for thermal printing: the ZPL protocol from Zebra and the TSPL protocol from TSC. This model is compatible with the BARTENDER software, an American software for managing printing, created by Seagull Scientific.

Technical Specifications

The stationary NOVA TLP300 printer has compact dimensions. The length of the model is 285 mm, width 226 mm, height 171 mm. The printing device will not take up much space on a desk. The model is suitable for any business sector. It is used in retail, warehouses, offices, and pharmaceutical companies.

The device is equipped with 4 sensors:

1. Fixed transmissive.
2. Adjustable reflective.
3. Ribbon end control.
4. Thermal head position control.

If a sensor registers an error, a light and sound indication is activated. The MERTECH TERRA NOVA TLP300 prints labels and receipts with a length of 15-1200 mm and a width of 108 mm. The maximum ribbon length is 300 meters.

Different materials are suitable for printing. It is possible to print on labels with a tear, hole with a black mark. Ribbons based on resin, wax, or a mixture of materials can be used. However, the print quality depends not only on the device but also on the chosen substrate.

Package Contents

The package includes the printer itself, a manual, a warranty certificate, label tape, and ribbon. Before starting work, drivers must be installed from the service site. After installing the drivers, the device can be connected to the POS system, change its settings, and set the appearance of receipts and labels.